What does it mean for a pool to be grounded?

Grounding is the process by which the bonded pool components are connected to the earth. Without a grounding system in place, people or pool equipment may become the conductor. Harmful electrical current may move toward people, pets, or equipment instead of moving away and to the earth.

In this manner, what does grounding a pool mean?

Grounding a Swimming Pool Grounding refers to protecting people in the pool from a potential fault in the electrical system (in the main electrical panel or pool sub-panel). A fault in the electrical system refers to a higher than normal flow of electrical current.

how do you ground an antenna? Ground the Antenna Mast Grounding the coaxial was the hard part. Grounding the mast is easy. Simply attach an 8 or 10 AWG copper wire to the mast using a mast ground clamp and run the other end of the copper wire to the house ground.

Then, do swimming pools need to be grounded?

The electrical equipment for swimming pools must be grounded and connected by wiring methods in accordance with the NFPA 70 National Electric Code® (NEC®). The following must be grounded: all electrical equipment associated with the circulation system; pool motors.

How do I test my pool bonding?

Using an alligator clip, attach one end of the roll of wire to an exposed bonding wire at the equipment pad. Unroll the amount of wire necessary to reach the furthest component to be tested. Connect the other alligator clip end of the wire to one of the ohmmeter test leads.

Why do you bond a swimming pool?

The goal of bonding is to connect, contain and prevent the transmission of any harmful electrical voltage to pool equipment, people and pets. Bonding connects the pool' s electrical and non-electrical metal components into a network that contains the electricity.

Are Indoor Pools grounded?

Indoor pool facilities are typically bonded and grounded so they are safe. While bonded and grounded buildings that are bonded and grounded make it easier for lightning to travel to the ground without resistance, they are not safe when it comes to water.

What is a bonding lug?

Bonding lug or wire missing Pumps will often have a bonding lug to which a copper bonding wire is connected. These bonding wires may come loose or get pulled out and need to be re-connected properly. Pool heaters, filters and other equipment items that are metal, likewise should be bonded.

Does a resin pool need to be bonded?

If the pool is considered a "Storable Pool", then it does not need to be bonded and it must have a double insulated pump. Most above ground pools that are 42" deep or shallower are considered storable.

Do I need to bond my above ground pool?

2 Answers. You need to BOND the pool structure and any equipment (motors, etc) or metal parts associated with the water circulation system. You also need to bond the water itself. Ground rods are NOT required other than for a sub-panel (if installed outside the house).

Why do you bond a pool?

(Wikipedia) Another way of putting it is that the primary purpose of bonding is to keep people and electricity separated. A bonded pool balances the electrical pressure and keeps all currents flowing outward into a bonding wire or grid where they are safely dispersed.

Why is electrical bonding critical?

Bonding is used to reduce the risk of electric shocks to anyone who may touch two separate metal parts when there is a fault somewhere in the supply of electrical installation. By connecting bonding conductors between particular parts, it reduces the voltage there might have been.

What does shock do to a pool?

Shocking your pool simply means you give the water a jolt with chemicals so the system can be reset. It ensures the impurities are killed and the water is clean and safe for you to swim in. Shocking your pool typically involves putting at least three times more the normal amount of chlorine and other sanitizers.

What is a bonding grid for a swimming pool?

Bonding your pool is a safety measure to prevent accidentally getting electrocuted or seriously injured. You need to create a field around your swimming pool by attaching the bonding wire to the metal deck, pool equipment, metal pool wall, and even the water.

How much does it cost to bond a pool?

General Price Range In the Virginia, Maryland, and D.C. areas, a standard electrical hook-up package for an inground pool will generally cost between $3,500 and $4,500.

What is the purpose of bonding?

The NEC defines bonding as, "The permanent joining of metallic parts to form an electrically conductive path that ensures electrical continuity and the capacity to conduct safely any current likely to be imposed." As it relates to a communications system, the primary purpose of bonding is to equalize ground potential