Steps - Loosen the wheel lug nuts. Loosen them slightly, but do not remove.
- Jack up/lift the car.
- Remove the lug nuts and the wheel.
- Identify the bad link.
- Remove the nut holding the sway bar link to the sway bar.
- Install the new link.
- Tighten the nuts.
- Compress the bushings about half.
.
Just so, how do you replace a rear stabilizer bar link?
Steps
- Loosen the wheel lug nuts. Loosen them slightly, but do not remove.
- Jack up/lift the car.
- Remove the lug nuts and the wheel.
- Identify the bad link.
- Remove the nut holding the sway bar link to the sway bar.
- Install the new link.
- Tighten the nuts.
- Compress the bushings about half.
Additionally, do you need an alignment after replacing sway bar links? Basically, if the steering rack, tie rods, subframe, or control arm bolts have been altered or the car has been lowered, you need an alignment. Removing the sway bar, and replacing it would not require an alignment, unless something that I mentioned above had to be moved to access the sway bar.
Likewise, people ask, how much does it cost to replace rear sway bar links?
The average cost for a sway bar end link replacement - rear is between $110 and $161. Labor costs are estimated between $52 and $67 while parts are priced between $58 and $94. Estimate does not include taxes and fees.
Is it hard to replace sway bar links?
No, but in many cars an old sway bar link could be extremely difficult to remove without damaging it, as the threads could be rusted. Because of this, sway bar links are often replaced whenever a component (a strut or control arm) that the link is connected to is replaced.
Related Question Answers
How do I know if my stabilizer links are bad?
These are the most common signs of a failing sway bar link: - Popping or knocking noise: A popping or knocking noise from the area when you go over bumps is the most common sign of a faulty sway bar link.
- Reduced handling: A broken sway bar link means the sway bar is no longer attached to the vehicle.
How long does it take to replace sway bar links?
Bushings should take maybe 30-40 minutes to change (in pairs) front and rear. Same thing for the links. Bushings should take maybe 30-40 minutes to change (in pairs) front and rear.How much do you tighten sway bar links?
Tighten the sway bar link nut using a combination wrench to hold the bolt head and a torque wrench and socket to tighten the nut. Use caution when tightening the link: it only requires light torque, typically 10 to 20 foot-pounds.How does a rear sway bar affect handling?
By increasing the stiffness of the rear sway bar on a front wheel drive car the rear inside wheel of the car will want to lift, and as such you can reduce body roll. Because the front tires are putting power to the ground, this would drastically affect the cars grip and handling in a negative way.Can you drive without a sway bar link?
Driving without sway bar end links can be dangerous because as you've noticed, the vehicle will not steer correctly. Sway bar end links are meant to stabilize a vehicle when turning and at high speeds. You can have your sway bar end links installed by YourMechanic for 97.00.How many stabilizer links does a car have?
Two stabilizer links on a domestic car should set you back around $120 to $150 at a budget repair shop. Unlike many other items on your car, new stabilizer links have an immediate and noticeable effect on the quality of your drive.What happens if sway bar link breaks?
Because a sway bar helps the car's suspension to put more pressure on loaded springs, a broken sway bar means that the car's suspension will not be able to handle corners as well or as quickly. While it is possible to drive with a broken sway bar, as a precaution do not take corners with excessive speeds.Is a sway bar link the same as a stabilizer link?
Sway Bar End Link. Sway bar end links are the attachment points between a sway bar and suspension members. Also known as a stabilizer bar or anti-roll bar, the sway bar connects suspension components on either side of the car to minimize body leaning in turns.What does the stabilizer bar link do?
Sway bar links are what connect the outer end of the sway bar to the suspension component. Because the sway bar itself is a torsional swing, the sway bar link smooths the motion transfer between the sway bar and the control arm. The sway bar link maintains the camber angle of the inner wheels to control motion.What does a bad sway bar link sound like?
If you're driving down the road and you start to hear a clunking, rattling or metal-on-metal scratching noise, it is possibly the stabilizer bar links causing the sound. When the links are worn out, the sway bar will begin to make these sounds especially when you're driving around corners or over a speed bump.What do rear end links do?
End links serve as a connection between your vehicle's sway bar (anti-roll bar) and the vehicle's suspension. In short, the sway bar helps to decrease the amount of weight transfer, keeping a greater contact patch of the tire on the ground, increasing the grip & performance of the vehicle.Can you drive a car without a stabilizer bar?
TOM: Removing it won't make the car unsafe to drive. In fact, anti-sway bars were commonly optional equipment a decade ago. But without the sway bar, the car will not handle and corner as well, or as comfortably for the driver and passengers, and your son will have to get used to driving slower on turns.How much does it cost to replace stabilizer links?
The average cost for a sway bar end link replacement - front is between $126 and $161. Labor costs are estimated between $52 and $67 while parts are priced between $74 and $94. Estimate does not include taxes and fees.Is a rear sway bar necessary?
Rear sway bars are recommended for a variety of vehicles, though it's not always immediately clear when a rear bar is most called for. The general rule of thumb is that a rear wheel drive vehicle will benefit from a front sway bar, while a front-wheel drive will benefit from a rear sway bar.How much does it cost to get a sway bar fixed?
The sway bar can deteriorate over time or become damaged, and at that point, it will need to be replaced. This replacement will cost you between $130 and $160. The labor should run you between $50 and $70, while parts should cost $75 and $95.Can I drive with a broken rear sway bar link?
Depending on the vehicle you're driving, you may have a front or a rear sway bar, or you may have both. If you suspect that a sway bar is broken, you can still drive the car, but you must use caution. The way this will affect your drive will depend on if the front or rear sway bar is broken. How much do sway bar bushings cost?
The average cost for a stabilizer bushing replacement is between $100 and $143. Labor costs are estimated between $70 and $90 while parts are priced between $30 and $53.What is a stabilizer link kit?
A stabilizer bar system is part of most vehicle suspension systems. It connects the front wheels (left and right), and in many cases the rear wheels, through short links connected to a suspension component at each wheel. Stabilizer bars are also referred to as anti-sway bars, sway bars, anti-roll bars, and roll bars.What is a rear lateral link?
There are fewer suspension components in the rear of your car, but one of the most critical is the lateral link. It connects the hub to the midpoint of the body, and keeps the wheel/hub assembly upright and centered while driving. Lateral links are hollow metal tubes with a connection point on either end. 
